screen-shot-2016-12-06-at-20-04-05

Sureform System SF14

The Sureform System SF14 is a self-climbing hydraulic jumpform systems used to form the core walls of a multilevel structure. The SF14  encompasses the wallforms and a supporting structural steel frame climbing frame, complete with 3 to 5 levels of working decks.

The SF14  is designed with the hydraulic rams to be installed into the bracing columns, opening up the work areas inside the cells (boxes) and therefore creating a safer work environment for formworkers and steelfixers required to work with the system.

TheSF14 is also fitted with the patented Sureform System 3 way adjustor allowing for the easy adjustment of the wallforms within the system.

screen-shot-2016-12-06-at-19-42-45

Sureform Systems SF25-2FP

  • 2 floor pour system (80 Arthur Street North Sydney Australia)
  • Jump 4.8m in a single stroke of a ram.

mk1

Sureform Perimeter System SF25-Xtrude

  • Perimeter System (330 Church Street Parramatta NSW Australia)

  • Forms the sheer walls and columns to provide protection system for the slab edge Formwork and climbs as one unit to the next floor.

crane handled formworks

Crane Handled Formwork Systems

Sureform System has design a range of crane handled formwork systems design to form the vertical elements of a concrete structure:

  • Crane Handled Core Forming Systems:
    • 70 Queens Road, internal cell with external wallforms removed with crane each floor, designed to be 1 pour ahead of the floor slabs.
    • Melbourne Water, external wallforms on strong backs, designed to operate independent of the floor slabs.
    • Rolling external wallform.
  • Crane Handled Columnform Systems:
    • Columnforms complete with working decks designed to be poured in advance of the floor slabs.
    • Columnforms designed to be poured on the slab.

edge protection screen Sureform

Edge Protection Screens

  • The Hickory colossus
  • Crane handled formwork screen
  • Hydraulic climbed formwork screen
  • Complete façade behind formwork screen

tableforms - horizontal formwork protection screen

Horizontal Formwork Systems

  • Tableforms
  • Tableforms with built in complete with edge protection, removing the need for edge protection screens.
  • Façade installation tableforms, allowing the façade panels to be lowered through the formwork deck and installed 1 floor below the wet deck. These tableforms also have in built edge protection removing the need for edge protection screens.

formwork

General requests

  • Lift shaft protection and template decks, used by lift installation personnel to install lifts into shafts below the core formwork system.
  • Formwork hoist, used by formworkers to lift materials between floors and remove any dependency &/ or delays to productivity by being dependant on the usually overcommitted crane.
  • Crucifix to install concrete boom pump onto a core jumpform system.

Project Specific Issue Resolution

  • Cantilever decks allowing for a tower to widen at any floor, 27 Little Collins Street.
  • Specialised forms for truss’ or ‘V’ shaped concrete columns, Swinburne Hawthorne.
  • Tapered Columnforms, Swinburne Hawthorne.
  • Cantilevered tableforms complete with hydraulically controlled counterweighted lifting beam, 35 Albert Road.

Australian made Formwork
& Perimeter Screen Systems

Contact our team